Masonry To Steel Stud

Sure Tie ( #4520 )

Sure Tie (#4520)
DESCRIPTION:
  • One-piece design provides superior strength.
  • 12-24 self driller.
  • Accommodates 1/2″ and 5/8″ wallboard and various thicknesses of insulation.
  • Complies with ACI 530 Code.
  • Allows positive contact with steel stud backup….

RJ 711 ( #2401 )

RJ-711 (#2401) with Pintle (#2402)
DESCRIPTION:
  • RJ-711 adjustable veneer anchor with a 3/16″ dia pintle meets the Brick Institute of America’s requirement of a maximum deflection of less than .05 inches (1.2mm) when tested at an axial load of 100 pounds in tension and compression. Extensive test results available upon request.
  • Pintle adjustments are maximum of 1-1/4″ up or down and prevent in-and-out movement beyond allowable tolerances….

HCL 711 ( #2411 )

HCL-711 (#2401) with Pintle (#2402)
DESCRIPTION:
  • HCL-711 Anchoring system installs quickly and easily on exterior walls with brick veneer while providing positive contact with metal stud and avoiding damage to wallboard.
  • The HCL-711 System moves the dew point from within the stud to near the outer face of the rigid insulation, reducing potential corrosion at the screw locations….

Type III ( # 1004 )

Type III Screw-On (#1004) with Triangular Tie ( #1100)
DESCRIPTION:
  • TypeIII Screw-On Veneer Anchor is used for anchoring brick veneerto metal stud.

  • Used in conjunction with the 1100 series triangular ties….

Type III X ( #1004X )

Type III X Anchor (#1004) with Triangular Tie (#1100)
DESCRIPTION:
  • WIRE-BOND®’s Type III-X Anchor installs quickly and easily on exterior walls with brick veneer.
  • Provides positive contact with metal studs.
  • Transfers compression loads to the steel stud backup….

RJ 721 Anchoring System ( #2421 & #2422 )

RJ 721 Anchoring System ( #2421 & #2422 )
DESCRIPTION:
  • The RJ721 is comprised of a plate with legs (2421) and a heavy duty seismic adjustable anchor (2422).
  • The seismic anchor is notched to accept 9 gauge or 3/16? continuous wire.
  • The seismic lug allows straight and cut wire to run horizontally along the bed joint in brick veneer….