Truss 2 Wire

Documents: 1 - 7 of 9

add TYPEVIEW DOCUMENT
folder Submittal link Truss 2 Wire
folder Submittal link Corner
folder Submittal link Tee
folder SDS link Bright Basic Wire
folder SDS link Mill Galvanized Wire
folder SDS link Hot Dip Galvanized
folder SDS link Stainless Steel
close

Truss 2 Wire

DOCUMENTS - 7

TYPEVIEW DOCUMENTEMAIL DOCUMENTDESCRIPTION
link Submittal link Truss 2 Wire email truss 2 wire.pdf Truss 2 Wire
link Submittal link Corner email truss 2 wire corner.pdf Truss 2 Wire Corner
link Submittal link Tee email truss 2 wire tee.pdf Truss 2 Wire Tee
link SDS link Bright Basic Wire email brite basic wire sds.pdf Bright Basic Wire SDS
link SDS link Mill Galvanized Wire email mill galvanized steel wire sds.pdf Mill Galvanized Wire SDS
link SDS link Hot Dip Galvanized email hot dip galvanized sds.pdf Hot Dip Galvanized SDS
link SDS link Stainless Steel email stainless steel sds.pdf Stainless Steel SDS Sheet

Description:

We recommend utilizing the extra strength of truss when installing reinforcement in single wythe walls, where the application of grout and rebar is at a minimum.

 

Corners and Tee's Available:

Truss 2 Wire Corner

Truss 2 Wire Tee

Features:

  • Truss design is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry.
  • Manufactured in 10'-0" lengths from wire conforming to ASTM A1064/A1064M, ASTM A82/ A82M for cold drawn steel wire.
  • Consists of two or more parallel and deformed longitudinal wires welded to a continuous diagonal cross wire at 16″ O.C.
  • Out-to-out spacing is approximately two inches less than the nominal thickness of the wall.

Dimensions:

Wire Gauges Side Rods Cross Rods
Standard 9 gauge (.148 in) 9 gauge
Heavy Duty 3/16" (.187 in) 9 gauge
Extra Heavy Duty 3/16" (.187 in) 3/16"

FINISHES:

  • Mill Galvanized
  • Hot Dip Galvanized
  • Stainless Steel