Page 42 - WIRE-BOND Products Catalog

WIRE-BOND M O R T A R S U S P E N S I O N

Cavity Net DT

Cavity Net DT : 100 ft. per box.
10” High x 5’ Long
Thickness : 1” and 2” #3611D

Cavity Net DT is used in masonry cavity wall
construction. Manufactured from high-strength nylon
with a 95% open three dimensional matrix. Cavity Net
DT allows air and water to flow freely. It's unique
dovetail shape with continuous base suspends mortar
droppings at two levels preventing mortar bridging and
allows moisture to exit the wall through weeps or vents.
• 95% Open Nylon Mesh allows unobstructed passage of
air and water allowing wall cavity to dry and drain quickly.

• Design permanently suspends mortar droppings preventing
any blockage of weep holes.

• Durable nylon composition designed to last the lifespan of the
building.

• Compressible to allow for cavity variations.

• Ease of installation - Just place in cavity.

Cavity Net #3611R

Cavity Net I is a polymer core geomatrix
composed of high density polyethylene strands
woven into a .80″ thick mesh.
The design allows moisture to seep down
through any mortar droppings and exit the
cavity wall through the weep holes. Used in
cavity walls ranging from 1″ to 1-3/4″ in width.

Cavity Net II is a 1.5″ thick high density
polyethylene goemetric design used for cavities
2″ and wider. The staggered dimples design
suspend mortar droppings and redirects Cavity Net I : 200ft. per box.
moisture to the exterior by way of the weep ( 4 rolls at 50ft.)
holes. The slightly narrower design helps avoid Cavity Net II : 140ft. per box.
any possible bridging of mortar across the ( 4 rolls at 35ft.)
cavity.

42 For Material Conformance / Submittal Sheets, see wirebond.com WIRE-BOND 800 - 849 - 6722