RJ-711 Adjustable Veneer Anchor
Documents: 8 - 14 of 18
add | TYPE | VIEW DOCUMENT | submittal
---|---|---|
Submittal | link Seismic (Plastic Clip) (Insulation) | |
Submittal | link Seismic (Plastic Clip) (no insulation) | |
Submittal | link RJ 711(insulation) | |
Submittal | link RJ 711 (no Insulation) | |
SDS | link Stainless Steel | |
SDS | link Bright Basic Wire | |
SDS | link Mill Galvanized |
close
RJ-711 Adjustable Veneer Anchor
DOCUMENTS - 7
TYPE | VIEW DOCUMENT | EMAIL DOCUMENT | DESCRIPTION | has-background-info has-text-white
---|---|---|---|
link Submittal | link Seismic (Plastic Clip) (Insulation) | email rj711 insulation seismic plastic.pdf | RJ 711 seismic(plastic clip) with insulation |
link Submittal | link Seismic (Plastic Clip) (no insulation) | email rj711 plastic seismic clip.pdf | RJ 711 seismic(plastic clip) without insulation |
link Submittal | link RJ 711(insulation) | email rj711 insulation.pdf | RJ 711 with insulation |
link Submittal | link RJ 711 (no Insulation) | email rj711 adjustable veneer anchor.pdf | RJ 711 without insulation |
link SDS | link Stainless Steel | email stainless steel sds.pdf | Stainless Steel SDS Flats |
link SDS | link Bright Basic Wire | email brite basic wire sds.pdf | Bright Basic Wire SDS |
link SDS | link Mill Galvanized | email mill galvanized sds.pdf | Mill Galvanized Flat SDS |
Description:
RJ 711 adjustable veneer anchor (#2401) with a 3/16" dia. pintle (#2402) meets the Brick Institute of America’s requirement of a maximum deflection of less than .05 inches (1.2mm) when tested at an axial load of 100 pounds in tension and compression.
Extensive test results available upon request.
Dimensions:
Part | Length | Gauge |
---|---|---|
#2401 RJ 711 Plate |
Legs can accommodate up to 4" of insulation |
14 or 12 gauge |
#2402 Pintle | 3-1/4" 4-1/4" 5-1/4" |
3/16" dia. standard |
Pintle adjustments are maximum of 1-1/4" up or down and prevent in-and-out movement beyond allowable tolerances.
FINISHES:
- Hot Dip Galvanized
- Stainless Steel