RJ-711 Adjustable Veneer Anchor
Documents: 15 - 18 of 18
add | TYPE | VIEW DOCUMENT | sds
---|---|---|
SDS | link Hot Dip Galvanized | |
SDS | link Galvanized Sheet Steel | |
LEED | link RJ 711 | |
LEED | link RJ 711 St. St. |
close
RJ-711 Adjustable Veneer Anchor
DOCUMENTS - 4
TYPE | VIEW DOCUMENT | EMAIL DOCUMENT | DESCRIPTION | has-background-warning
---|---|---|---|
link SDS | link Hot Dip Galvanized | email hot dip galvanized sds.pdf | Hot Dip Galvanized Flat SDS |
link SDS | link Galvanized Sheet Steel | email galvanized sheet steel sds.pdf | Galvanized Sheet Steel |
link LEED | link RJ 711 | email RJ-711_LEED.pdf | RJ 711 LEED |
link LEED | link RJ 711 St. St. | email RJ711 Stainless Steel_LEED.pdf | RJ 711 LEED St. St. |
Description:
RJ 711 adjustable veneer anchor (#2401) with a 3/16" dia. pintle (#2402) meets the Brick Institute of America’s requirement of a maximum deflection of less than .05 inches (1.2mm) when tested at an axial load of 100 pounds in tension and compression.
Extensive test results available upon request.
Dimensions:
Part | Length | Gauge |
---|---|---|
#2401 RJ 711 Plate |
Legs can accommodate up to 4" of insulation |
14 or 12 gauge |
#2402 Pintle | 3-1/4" 4-1/4" 5-1/4" |
3/16" dia. standard |
Pintle adjustments are maximum of 1-1/4" up or down and prevent in-and-out movement beyond allowable tolerances.
FINISHES:
- Hot Dip Galvanized
- Stainless Steel