4140
Copper Seal Flashing
Wire-Bond's Copper Seal copper fabric flashing is a full, single sheet of 3, 5, or 7oz. copper sheet bonded with a rubber based adhesive between two layers of polymer fabric.
Made in the USAA termination bar is required for surface-mounted applications.
Features
- Works in all temperatures (-25°F-125°F).
- Compatible with building envelope air barriers, spray foam insulations and rigid board insulations.
- Clean and compatible - no asphalt or parting agents.
- Made of 90% recycled copper.
- Lighter weight allows longer 60-ft. rolls for fewer lap joints (40′ for 7oz).
- Compatible with most caulks and sealants; no special flashing mastic needed, polyether sealants are recommended.
Dimensions
| 3 and 5 oz. | 60 linear feet per roll |
| 7 oz. | 40 linear feet per roll |
| Available Lengths |
|---|
| 12", 16", 18", 24", and 36" |
Material:
Copper sheet bonded with a rubber based adhesive between two layers of polymer fabric.
Applications:
- Foundation Sill Flashing
- Cavity Wall Flashing
- Parapet or Copings
- Base flashing
- Spandrel flashing
- Head and sill flashing
Documents
Submittal
SDS
LEED
Installation
Questions about Copper Seal Flashing?
Talk to your local sales representative.
