flashing products
Note: Flat hem drip plates should only be used at the base of masonry walls when selected as part of an architectural solution.

Description

The #4167 Drip Edge flat hem is factory formed and utilized to continuously connect straight length flashings together via a smooth lapped edge. Straight length flashings are designed to be integrated and lapped together using pre-formed corners. Utilizing a rigid stainless corner and end dam system is the standard for the best moisture penetration control.

Dimensions:

  • Standard 26ga x 3" or 1-1/2" wide by 8' sections.
  • 3/8" 45° lip with a 3/16" closed hem.

Material:

  • Stainless Steel - Type 304
  • Meets all Federal specifications – ASTM A240/A240M, ASTM A666, and ASTM A480/A480M.
QUESTIONS?

Copyright© 2025 WIRE-BOND All Rights Reserved

Products Videos

Corporate Office

400 Rountree Road

Charlotte, NC 28217

Tel: 800-849-6722

Memphis Plant

2365 Harbor Avenue

Memphis, TN 38113

Tel: 800-441-8359

Union NJ

675 Rahway Avenue

Union, NJ 07083

Tel: 800-849-6722