Tab Lock Truss
QUESTIONS?
Documents: 6
| Type | View Document | ||
|---|---|---|---|
| submittal | Tab Lock Truss | ||
| sds | Stainless Steel | ||
| sds | Hot Dip Galvanized | ||
| sds | Bright Basic Wire | ||
| leed | Truss Mesh Reinforcement | ||
| leed | Truss Stainless Steel |
In Categories: 2
truss mesh reinforcement: 9
Description
Patent No. US 8,418,422 B2
Tab Lock design will not disengage meeting ACI 530 Code Requirements.
Features
- Adjustable ties have higher ultimate load values at maximum misalignment of 1-1/4".
- Tab Lock system allows loads to be directly transferred from veneer to stronger back-up wall.
- Locking ties wedge insulation against block back-up.
- Tab with Lock Bar will not clog with mortar as construction progresses.
- Looped Hooks meet tolerance of 1/16" between adjustable parts.
- Cross rods welded 16" O.C.
- Tab is butt welded to side rod 16" 0.C.
- Height of tab will not exceed 3/16" in bed joint.
- Easier to maintain 3/8" mortar joint.
Dimensions:
| Wire Gauges | Side Rods | Cross Rods |
|---|---|---|
| Standard | 9 gauge (.148 in) | 9 gauge |
| Heavy Duty | 3/16" (.187 in) | 9 gauge |
| Extra Heavy Duty | 3/16" (.187 in) | 3/16" |
Tabs are 3/16" dia. standard
Finishes:
- Hot Dip Galvanized
- Stainless Steel
QUESTIONS?
