2401
RJ-711 Adjustable Veneer Anchor
QUESTIONS?
#2401 RJ-711 Adjustable Veneer Anchor | Documents: 13
| Type | View Document | ||
|---|---|---|---|
| submittal | No Insulation | ||
| submittal | RJ 711 | ||
| submittal | Seismic (Metal Clip) | ||
| submittal | Seismic (Metal Clip) No Insulation | ||
| submittal | Seismic (Plastic Clip) | ||
| submittal | Seismic (Plastic Clip) No Insulation | ||
| test | RJ 711 / HCL 711 Test Data | ||
| sds | Stainless Steel | ||
| sds | Hot Dip Galvanized | ||
| sds | Bright Basic Wire | ||
| sds | Galvanized Sheet Steel | ||
| leed | RJ 711 | ||
| leed | RJ 711 St. St. |
Related Products: 2
In Categories: 4
veneer anchors: 11
Description
RJ 711 adjustable veneer anchor (#2401) with a 3/16" dia. pintle (#2402) meets the Brick Institute of America’s requirement of a maximum deflection of less than .05 inches (1.2mm) when tested at an axial load of 100 pounds in tension and compression.
Extensive test results available upon request.
Dimensions:
| Part | Length | Gauge |
|---|---|---|
| #2401 RJ 711 Plate |
Legs can accommodate up to 4" of insulation |
14 or 12 gauge |
| #2402 Pintle | 3-1/4" 4-1/4" 5-1/4" |
3/16" dia. standard |
Pintle adjustments are maximum of 1-1/4" up or down and prevent in-and-out movement beyond allowable tolerances.
Finishes:
- Hot Dip Galvanized
- Stainless Steel
QUESTIONS?
