Page 4 - WIRE-BOND Products Catalog

WIRE-BOND L A D D E R T Y P E
2 Wire System (Series 200)

Ladder Type Series 200 Ladder 2 Wire (Series 200)

Ladder design is a prefabricated reinforcement for embedment in
the horizontal mortar joints of masonry. It is manufactured in 10’
8” lengths from wire conforming to ASTM A1064/A1064M for
cold drawn steel wire. It consists of two or more parallel and
deformed longitudinal wires welded to a perpendicular cross wire
spaced 16” Out-to-out spacing is approximately two inches less
than the nominal thickness of the wall.

• Ladder design spaced 16” O.C. positions cross rods on the web
of the block to allow core clearance. • This placement simplifies
rebar installation; centering utilizes strength of grout. • Allows
unrestricted flow of grout or loose fill insulation into CMU cells.
• Minimizes re-setting of joint reinforcement around rebar.
• Improves resistance to shrinkage cracking. Provides stronger
bond with cross rods in web of block. • Less time devoted to
rebar installation and grout pouring.

4 Wire System (Series 200)
3 Wire System (Series 200)

Ladder Corners and Tee’s

Corners and tees are available for any joint reinforcement
product that we manufacture. 30” lengths are standard. Any
size and finish can be made to order for cavity or composite
walls. Specify inside or outside corners for cavity or
composite walls.

Tee (Series 200)
Corner(Series 200)

Corner(Series 800)

4 For Material Conformance / Submittal Sheets, see wirebond.com WIRE-BOND 800 - 849 - 6722