Page 7 - WIRE-BOND Products Catalog

T R U S S T Y P E W I T H T I E S WIRE-BOND
Level Hook & Eye Truss (Series 900)
(U.S Pat. #6,735,915) (U.S. Pat.#7,152,382B2

• Truss Level design is manufactured with double eyes butt
welded 16” O.C. to the longitudinal wires ensuring that the Level Hook & Eye (Series 900)
height of the reinforcing will not exceed 3/16” as required
by TMS 402 code.

• Compatible with the WireBond® Clip System for use in
seismic zones.

• Level Eye double eylets are welded 16” on center.
“ Lollipop” design of eyelets provides for less than 1/16”
tolerance and meets the TMS 402 Code.

• Level Eye ensures continuous 16” O.C. spacing. When in-
stalled vertically at 16” O.C. horizontal spacing ensures code
compliance requiring one 3/16” pintle every 1.77 feet of wall
area.

• Tabs are welded 16” O.C. Tabs and wall ties are designed to
meet the TMS 402 Code. Tabs and wall ties are
3/16” diameter wire and are produced on our high-speed,
multi-slide wire forming machines.

• Dual tangent points of the eyelets are made by a slight
indentation in the “U”. Dual tangent points of the tab are
made by bending the ends of each wire point. The points in
both systems achieve a deep weld into the side wires on the Adjustable Tab (Series 700)
reinforcement for maximum strength and durability.

Adjustable Tab (Series 700)

Truss Style Adjustable Joint Reinforcement with Tabs and
Wall Ties. Tabs are double welded on to side wires to
provide maximum strength and durability. Level Tabs
make it easier to maintain 3/8″ mortar joint. Allows use of Series 700
3/16″ side rods. Eliminates weld points that are too thick.

Butt welded to meet
TMS 402 Code

Height of the reinforcing Series 900
will not exceed 3/16”

WIRE-BOND 800 - 849 - 6722 For Material Conformance / Submittal Sheets, see wirebond.com 7