Page 16 - WIRE-BOND Products Catalog

WIRE-BOND M A S O N R Y T O W O O D S T U D

Tapcon SureTie’s

Tapcon® SureTie’s allow positive contact with wood stud. Compression and tension loads in the veneer are transferred to the
backup. High strength barrel and slotted head fabricated from carbon steel. Manufactured and tested in conformance with SAE J78
(self-drilling and self-tapping screws). SureTie holds insulation in place, permitting contractors to install 4'x 8' sheets with ease,
saving time and money.
Accommodates Various thicknesses of insulation. Blue Climaseal finish (Tapcons)
resulted in 0% red rust at 1000 hours exposure to ASTM B-117 salt spray testing.
SureTie WS Tapcon
US Pat. #9809955 SureTie Tapcon
#4532 wallboard #4530

#4510

#4515 #4590
Thermal Grip Washer

Adjustable Veneer Anchors for Wood Stud

These Adjustable veneer anchors are used for
anchoring brick veneer to wood stud with the
#4000 Wood Screw.
Type III
Type III #1004
1-1/4″ wide x 6″ long with over
3″ of vertical adjustability.Used
with the #1100 Triangle. #2401
#1100 RJ-711
Triangle

#4000W7 #2402 2407
Wood Screw RJ-711 Double
Hook
RJ 711 plate (#2401) with a
3/16″ dia. pintle (#2402) meets
the Brick Institute of America's #1100
Diameter: #9 and #12 requirement of a maximum Triangle
Thread Form: 9-15 and 12-14 deflection of less than .05 inches 2407
(1.2mm) when tested at an axial
Head Style: ¼” HWH load of 100 pounds in tension The 2407 system provides for in-
Washer Style: Galvanized(G-90) and compression. Pintle plane differential movement and can
Drill Point: Gimlet adjustments are maximum of 1- be installed on metal stud, wood stud,
1/4″ up or down and prevent in- masonry, steel or concrete backup
Finish: Climaseal
and-out movement beyond with or without insulation.
allowable tolerances.

16 For Material Conformance / Submittal Sheets, see wirebond.com WIRE-BOND 800 - 849 - 6722