Page 14 - WIRE-BOND Products Catalog

WIRE-BOND M A S O N R Y T O S T E E L S T U D

Type III Anchor

Individual anchors screw-on to metal studs. Available in 14 and 12 gauge by 1-1/4” wide and 6” long.
Finishes: mill galvanized, hot dip galvanized and stainless steel. The WIRE-BOND® Type III anchor 12
gauge, 3/16” adjustable tie, meets the Brick Industry of America’s requirement of a maximum deflection
of less than .05 inches (1.2mm) when tested at an axial load of 100 pounds in tension and compression.
Extensive test results available upon request.
#1004
Steel Stud

#1100

Screw

Type III
wallboard
Triangle

#4000
Climaseal
Screw

#4110
Anchorseal
Anchorseal

A 40 mil thick dual barrier membrane 3” wide, consisting of 32 mils of pliable
highly adhesive rubberized asphalt, completely and integrally bonded to an 8 mil #1100O Off-set Triangle with
high density cross-laminated polyethylene film. Anchorseal is used in conjunction #3690 Plastic Seismic Clip
with RJ-711, HCL-711, Type III, and Type III-X Anchors.

Triangular Ties

Constructed of steel wire meeting ASTM A1064/A1064M Available in 3/16” or
1/4” diameter. Finishes: mill galvanized, hot dip galvanized and stainless steel.
Standard sizes range from 3” to 9” in length.

Plastic Seismic Clip ( PSC ) accepts both
9 gauge and 3/16″ diameter pencil rod.
Can be used in any adjustable system
consisting of a pintle or triangle and
horizontal joint reinforcing wire.
#1100C Triangle with DIMENSIONS: 5/16″ X 1-1/2″ X 1-3/4″
#1100 Triangle welded metal clip

14 For Material Conformance / Submittal Sheets, see wirebond.com WIRE-BOND 800 - 849 - 6722