WIRE-BOND
WIRE-BOND Seismic Clip
Home / Products / seismic products / WIRE-BOND Seismic Clip
seismic products
USA Flag

MADE IN THE USA

QUESTIONS?

WIRE-BOND Seismic Clip | Documents: 3

In Categories: 1

seismic products: 7

Description

The WIRE-BOND® Metal Seismic Clip Can be used in any adjustable system consisting of a pintle or triangle and horizontal joint reinforcing wire.

Features

Widely accepted as the standard for seismic applications.

  • The WIRE-BOND® clip is preferred by masons everywhere because of its ease of installation, effectiveness, and durability.
  • Conforms to building code requirements for masonry structures(ACI530-05/ASCES-05/TMS402-05); seismic performance categories A-E.
  • All WIRE-BOND® seismic products are fully tested. Call for test results.
  • All WIRE-BOND® seismic products meet Uniform Building Code requirements listed in 1403.6.4.2.
  • "In seismic zones A – F, wall ties shall have a lip or hook on the extended leg that will engage or enclose a horizontal joint reinforcement wire having a diameter of 0.148 inch (3.76mm) (No. 9 B.W. gauge) or equivalent. The joint reinforcement shall be continuous with butt splices between ties permitted."
  • The Clip is welded to the tie at the factory, This simplifies installation at the job site.

Dimensions:

16 gauge standard

Finishes:

  • Hot Dip Galvanized
  • Stainless Steel
QUESTIONS?
Home / Products / seismic products / WIRE-BOND Seismic Clip
WIRE-BOND

Copyright© 2026 WIRE-BOND All Rights Reserved

Products Videos

Corporate Office

400 Rountree Road

Charlotte, NC 28217

Tel: 800-849-6722

Memphis Plant

2365 Harbor Avenue

Memphis, TN 38113

Tel: 800-441-8359

Union NJ

675 Rahway Avenue

Union, NJ 07083

Tel: 800-849-6722