Page 11 - fero wirebond catalog
P. 11
FAST™ BRACKET COMPONENTS
FULLY Typical Angle Iron FAST THERMAL
Typical Angle Iron
CUSTOMIZABLE Angle Iron: Standard angle sizes as Typical Angle Iron BRACKET
Standard angle sizes as required and can
Standard angle sizes as required and can
Standard angle sizes as required and can
any depth required and can be supplied locally be supplied locally
be supplied locally
be supplied locally
any height
any anchorage
any angle
FERO Shim Plate (Optional): Used to
add distance to help meet construction
tolerances perpendicular to the wall
FERO Wedge Rod and Washer: Included
FERO Wedge Rod and Washer
with every FAST order and required to use
Included with every FAST™ order and
with the FAST system
required to use with the FAST™ system
Included with
every order of FAST Anchor Bolt/Fastener: Specified by the
Typical Anchor
Typical Anchor
Thermal Brackets: structural engineer based on required FAST THERMAL
Specified by the structural engineer
Specified by the structural engineer
based on what is required for the project
FERO Washers structural performance BRACKET LINTEL
based on what is required for the project
FERO Shim Rods SYSTEM-EXTENDED
FERO Punched Angle
FERO Punched Angle
FERO Punched Angle
FERO Punched Angle: Supplied by FERO
Supplied by FERO as part of the
Supplied by FERO as part of the
as part of the patented FAST Lintel system
Supplied by FERO as part of the
patented FAST™ Lintel system
patented FAST™ Lintel system
patented FAST™ Lintel system
Any Size Shelf Angle
FERO FAST™ System; Canadian Pat. CA 2,284,069, CA 2,254,510; CA 2,591,687; CA 2,759,747; CA 2,759,837; and CA 2,759,778; US Pat. 6,128,883. Other Patents Pending.
FERO FAST™ System; Canadian Pat. CA 2,284,069, CA 2,254,510; CA 2,591,687; CA 2,759,747; CA 2,759,837; and CA 2,759,778; US Pat. 6,128,883. Other Patents Pending.
FERO FAST™ System; Canadian Pat. CA 2,284,069, CA 2,254,510; CA 2,591,687; CA 2,759,747; CA 2,759,837; and CA 2,759,778; US Pat. 6,128,883. Other Patents Pending.
FERO FAST™ System; Canadian Pat. CA 2,284,069, CA 2,254,510; CA 2,591,687; CA 2,759,747; CA 2,759,837; and CA 2,759,778; US Pat. 6,128,883. Other Patents Pending.
All FAST Bracket configurations (other than the FAST Thermal Lintel System which comes
with FAST punched lintel) can be used with any size shelf angle obtained from local suppliers.
FAST Thermal Lintel System
FERO’s FAST Punched Angle. The FAST Thermal Lintel System includes both FAST Thermal Lintel
Brackets and FERO’s proprietary FAST Punched Angle which can be manufactured to any size.
Shims
FAST Bracket Shim Plates accommodate construction tolerances horizontally, perpendicular
to the structural backing. FERO recommends ordering FAST Shim Plates with FAST Thermal
Brackets so they are readily available onsite as needed. FERO Fast Shims are hot dipped
galvanized or stainless steel, both fabricated in accordance with ASTM A123.
Fastener Requirements (Anchorage)
FAST Thermal Brackets are typically connected to the backing with one 5/8” (16mm) diameter fastener,
but can be fabricated for any fastener diameter or type of fastener, including embeds and anchor channels,
if desired, for a project. All fasteners are specified by the designer of the masonry veneer and are not
supplied by FERO, allowing for installers to source fasteners locally and economically.
FERO 11