Page 7 - WIRE-BOND Products Catalog
P. 7

T R U S S  T Y P E  W I T H  T I E S                                                       WIRE-BOND
           Level Hook & Eye Truss (Series 900)
           (U.S Pat. #6,735,915)       (U.S. Pat.#7,152,382B2


           • Truss Level design is manufactured with double eyes butt
             welded 16” O.C. to the longitudinal wires ensuring that the    Level Hook & Eye (Series 900)
             height of the reinforcing will not exceed 3/16” as required
             by TMS 402 code.

           • Compatible with the WireBond® Clip System for use in
              seismic zones.


           • Level Eye double eylets are welded 16” on center.
             “ Lollipop” design of eyelets provides for less than 1/16”
             tolerance and meets the TMS 402 Code.

           • Level Eye ensures continuous 16” O.C. spacing. When in-
             stalled vertically at 16” O.C. horizontal spacing ensures code
             compliance requiring one 3/16” pintle every 1.77 feet of wall
             area.

           • Tabs are welded 16” O.C.  Tabs and wall ties are designed to
             meet the TMS 402 Code.  Tabs and wall ties are
             3/16” diameter wire and are produced on our high-speed,
             multi-slide wire forming machines.

           • Dual tangent points of the eyelets are made by a slight
             indentation in the “U”. Dual tangent points of the tab are
             made by bending the ends of each wire point. The points in
             both systems achieve a deep weld into the side wires on the   Adjustable Tab (Series 700)
             reinforcement for maximum strength and durability.



             Adjustable Tab (Series 700)


            Truss Style Adjustable Joint Reinforcement with Tabs and
            Wall Ties. Tabs are double welded on to side wires to
            provide maximum strength and durability. Level Tabs
            make it easier to maintain 3/8″ mortar joint. Allows use of                                     Series 700
            3/16″ side rods. Eliminates weld points that are too thick.






                        Butt welded to meet
                          TMS 402 Code

                       Height of the reinforcing                                          Series 900
                        will not exceed 3/16”









           WIRE-BOND       800 - 849 - 6722         For Material Conformance / Submittal Sheets, see wirebond.com  7
   2   3   4   5   6   7   8   9   10   11   12