4194-4196
Corners & End Dams (Stainless Steel)
QUESTIONS?
Documents: 5
| Type | View Document | ||
|---|---|---|---|
| submittal | End Dam | ||
| submittal | Inside Corner | ||
| submittal | Outside Corner | ||
| sds | Stainless Steel | ||
| leed | Corners & End Dams |
In Categories: 1
products with installation instructions: 11
Description
WIRE-BOND's soldered Stainless Steel End Dams, Inside Corners and Outside Corners are installed under WIRE-BOND specified flashings for the best protection against moisture penetration at corner sections and end dams.
Simply place underneath flashing for the ultimate protection against moisture penetration at corners and end dams.
Features
- Soldered to ensure seal at joints.
- As opposed to 60 mil fabrics, this product allows smooth transition with flashing materials.
- Lays flat for easy installation right out of the box. (Some fabrics are difficult to install in colder weather, requiring a heat gun to flatten.)
Dimensions
| Type | Size |
|---|---|
| End Dam | 4" x 4" x 4" |
| Outside Corner | 4" x 4" x 6" x 10" |
| Inside Corner | 6" x 4" x 4" |
Material
- 26 gauge thickness
- Stainless Steel - Type 304
- ASTM A240/A240M
- ASTM A666
- ASTM A480/A480M
QUESTIONS?
