4192
EPDM Thru-Wall Flashing
QUESTIONS?
Documents: 12
| Type | View Document | ||
|---|---|---|---|
| submittal | Adhesive Tape | ||
| submittal | EPDM End Dam | ||
| submittal | EPDM Flashing | ||
| submittal | EPDM Inside Corner | ||
| submittal | EPDM Outside Corner | ||
| submittal | EPDM Primer | ||
| submittal | Lap Sealant Hard | ||
| submittal | Sealant Tacky | ||
| sds | EPDM Flashing | ||
| leed | EPDM Flashing | ||
| installation | Thru Wall Application | ||
| installation | Using Termination Bar |
In Categories: 2
products with installation instructions: 11
Note: A Termination Bar is required for surface-mounted applications.
Description
EPDM thru-wall flashing membrane is a flexible EPDM rubber membrane that forms a moisture retarder in cavity wall construction by redirecting water to a building exterior.
Features
- Exhibits excellent uniaxial and multiaxial tensile and hydrostatic features, enabling it to withstand typical stresses caused by point loading conditions in a masonry application while maintaining membrane integrity.
- Outstanding expansion and contraction characteristics.
- Highly resistant to masonry chemicals Flexible to -50° F.
- Easy to install/full line of installation accessories.
- Strong resistance to UV & ozone.
- Puncture and tear resistan.
- Remains flexible even after aging
EPDM thru-wall flashing membrane is a flexible EPDM rubber membrane that forms a moisture retarder in cavity wall construction by redirecting water to a building exterior.
Dimensions:
| Nominal Thickness | Available widths | Standard Length |
|---|---|---|
| 40 mils | 12", 16", 18", 24", and 36" | 50 lf per roll |
QUESTIONS?
